How to install fish tank filter screen and how to install and use fish tank filter

×

How to install the fish tank filter screen

An overview of the summary catalogue of this article:

• 1 、How to install the fish tank filter

  

• 2 、How to install the small fish tank filter and how to filter it?

• 3 、How to install the aquarium filter

• 4 、How to install the fish tank side filter?

• 5 、How to install the fish tank filter

How to install the Fish tank filter

1. The installation method of the fish tank filter is as follows: first, hold the outer frame of the filter with both hands, pay attention to its sealing gasket upward, do not collide with hard objects.

2. First hold the outer frame of the filter with both hands, pay attention to its sealing gasket upward, do not collide with hard objects. Insert a ventilation rubber tube above the built-in filter, pay attention to the wire as far as possible out of the water, or directly buy a sticky glass suction head, you can fix the wire at the edge of the Fish tank wall.

3. Put the fish tank on the ground first. The fish tank is divided into two parts: the tank body and the cabinet. Don't lift the tank block onto the cabinet first. First put the carton skin or foam evenly on the ground, and then put the cylinder on it, pay attention to the four corners of the fish tank, especially with foam cushion. (2) install upper and lower pipes in the cylinder.

How to install the small fish tank filter and how to filter it?

The coarse filter cotton (two layers) is wrapped outside the inlet of the outer filter bucket, which is more convenient for cleaning and replacement. Biochemical cotton, in the case of poor previous filtration, adsorb organic matter to achieve filtration. The glass ring, which accounts for 30.5% of the whole tank water volume, is used to culture nitrifying bacteria.

The filter is installed as follows: turn off the filter, unplug the power supply, and then remove the filter cover. Use the tool to loosen the nut that holds the filter, and then remove the existing pressure plate and filter element in order. The new filter element should be soaked in water for half an hour before installation to keep it moist.

The basic method is that the pump is installed properly-to form a cycle, and no feces is the best test. The wattage of the pump is a little larger than the conventional one-large water absorption, accelerated circulation, thicker cotton filter-which not only acts as a filter but also acts as a Nitrifying bacteria bed to achieve biological circulation.

How to install the aquarium filter

Fish tank filterHow to install the fish tank filter screenThe installation method isHow to install the fish tank filter screenFirst, hold the outer frame of the filter with both handsHow to install the fish tank filter screenNote that the sealing gasket is upHow to install the fish tank filter screenDo not collide with hard objects

How to install the fish tank filter first hold the outer frame of the filter with both hands, pay attention to its sealing gasket upward, do not collide with hard objects. Insert a ventilation rubber tube above the built-in filter, pay attention to the wire as far as possible out of the water, or directly buy a sticky glass suction head, you can fix the wire at the edge of the fish tank wall.

The upper circulating filtration (upper filtration) is placed on the upper part of the fish tank, and the water is pumped into the upper filter tank through the submersible pump, and the water flows back to the fish tank through the filter cotton, biochemical cotton and various filter materials, and then back to the fish tank through the outlet pipe at the bottom. The utility model has the advantages of low price, simple structure, convenient cleaning and maintenance, but occupies space and affects beauty, so it is not suitable for grass cylinders.

Put the oxygen pipe through the corner of the bezel into the fish tank. Connect the bubble head at the outlet of the oxygen pipe. Put the filter bag directly into the fish tank. Cover with filter cotton. Install the filter pump, which is a sucker and adsorbs directly on the glass. Take out the oxygen pump. Connect the oxygen pump to the other end of the oxygen pipe.

How to arrange the fish tank filter should be arranged according to different filtering modes, such asHow to install the fish tank filter screenThe upper filter should be placed on top of the fish tank. The bottom filter should be placed under the fish tank. The side filter should be placed on one side (or both sides) of the fish tank. The internal filter should be put in the fish tank. The bucket filter should be connected to the outside of the fish tank.

How to install the fish tank side filter?

1. The installation method of the filter is as follows: turn off the filter, unplug the power supply, and then remove the filter cover plate. Use the tool to loosen the nut that holds the filter, and then remove the existing pressure plate and filter element in order. The new filter element should be soaked in water for half an hour before installation to keep it moist.

2. The installation method of the fish tank filter is: first, hold the outer frame of the filter with both hands, pay attention to its sealing gasket upward, do not collide with the hard object.

3, how to install the fish tank filter first hold the outer frame of the filter with both hands, pay attention to its sealing gasket upward, do not collide with the hard object. Insert a ventilation rubber tube above the built-in filter, pay attention to the wire as far as possible out of the water, or directly buy a sticky glass suction head, you can fix the wire at the edge of the fish tank wall.

4. There are in and out marks on the lid, pay attention to the distinction, fill the bucket with water, cover the lid, plug in and use it. Other upper filter cartridges and bottom cylinder filters should not need to be installed separately.

How to install the fish tank filter

How to install the fish tank filter first hold the outer frame of the filter with both hands, pay attention to its sealing gasket upward, do not collide with hard objects. Insert a ventilation rubber tube above the built-in filter, pay attention to the wire as far as possible out of the water, or directly buy a sticky glass suction head, you can fix the wire at the edge of the fish tank wall.

The installation method of the fish tank filter is as follows: first, hold the outer frame of the filter with both hands, pay attention to its sealing gasket upward, do not collide with hard objects.

Put the fish tank on the ground first. The fish tank is divided into two parts: the tank body and the cabinet. Don't lift the tank block onto the cabinet first. First put the carton skin or foam evenly on the ground, and then put the cylinder on it, pay attention to the four corners of the fish tank, especially with foam cushion. (2) install upper and lower pipes in the cylinder.

ASIAN AROWANA：

Three Ratfish of the Emperor Ask the god to save the little flower

The newcomer Xiao long set up a file.

Long time no photo

The original big fish began to swim around in the three hours of Hechi

Panda Gold Cross Back