The designed fish tank was cut glass yesterday, 1000x300x750 high, but today I suddenly thought of a serious problem . that is, the distance between the overflow plate and the baffle plate is 5mm, the baffle plate is 10mm from the bottom, but the water body is only 200 liters.The water is 650cm high. Will it be too high to suck up?Or how big is the pump?Seeking expert advice .
= (Comments on alliance SianLon Arowana Aquatic friends) =
Acrylic board can be used directly for the water baffle, but generally the 3mm thick acrylic board is thin. If your overflow is full cylinder width (30cm), you need to use a straight glass strip to hold the acrylic board at the two corners and in the middle.If the four corner overflow area is used, the corner needs to be held up.Your way of thinking, there is no problem to suck fish.
Personal opinion: 1. Your tank height is 750 too high, it is not necessary to raise tropical fish so deep, and it is very troublesome to clean the bottom of the tank; 2. The distance between the water baffle and the water level plate is 10 ~ 12mm. It is no problem to suck fish. 5mm is too small.The height of the fish comb is 15mm, and the lower port of the upper oil film hole is 8 ~ 10mm higher than the upper port of the water level plate. 3. The pump is selected according to 6 ~ 10 times the volume of the main tank (related to the inlet and outlet pipe diameter, head, and elbow).
More professional than us
Yuyou bg6ixm Say: Abandon the water-retaining glass on the outer layer of the overflow trough, just a layer of acrylic plate, leaving a gap of about one centimeter.
The outer layer does not need to bear pressure, and there is no need to add another layer of glass. Acrylic sheet is indispensable, otherwise it is too ugly, and the outer layer of glass is not easy to stick.
Yuyou Xiaoshuaishuai 001 Say: Bangding
Yuyou zp850621 Say: Good luck sticking cylinder.
The night of fish friends Say:
Thank you for your detailed reply. Please post it and post it to me!By the way, what type or shape of filter media is best? u135AEKD6302
Acrylic board can be used directly for the water baffle, but generally 3mm thick acrylic board is thin, if your overflow is full cylinder width (30cm), it needs to be in the two corners and middle.
Yuyou u135AEKD6302 Say:
Personally feel that the type and shape of the biochemical filter material (ball, rod, ring) is not the most important, but only for implantation of nitrifying bacteria, the key is neutral, try not to affect the PH value. Night blue
Thank you for your detailed reply. Please post it and post it to me!By the way, what type or shape of filter media is best? .
Yuyou Longer Say: Look at your tanknile tilapiaGuangdong Jinlongyu Wire Price List&Jinlongyu Cable Price Quotes:Is Jinlongyu cable price list available in Wuhan?,Jinlongyu wire price gold%Jinlongyu National Standard Wire Price List*How to check Jinlongyu wire$The difference between true and false Jinlongyu wires)Jinlongyu multi-core wire prices(Jinlongyu 16 square wire price^